《Chinese Journal of Aeronautics》
Volume 38, No.11, November 2025
CONTENTS
本期共发表36篇航空航天相关论文，具体栏目及篇数如下：
Fluid Mechanics and Flight Mechanics (11)
Solid Mechanics and Vehicle Conceptual Design (5)
Electronics and Electrical Engineering and Control (14)
Material Engineering and Mechanical Manufacturing (6)
Fluid Mechanics and Flight Mechanics
Active flow control in aeronautic field and disease treatment in medical field (Views & Comments)
Z. ZUO and X. ZHANG
Experimental and mechanism investigation of mixing characteristics in alternating wedge struts with expansive trailing edges
Z. ZHANG, W. SONG, Y. WANG, J. LI, Y. WANG, Y. LUO and P. WU
Plume focusing characteristics and optimal design of Hall thruster with large height-radius ratio
H. FAN, Y. ZHANG, H. YANG and Y. DING
Experimental investigation on ignition characteristics of multichannel jet enhanced plasma igniter under high altitude extreme conditions
Z. SHANG, H. MIAO, Z. ZHANG, M. JIA, W. CUI and Y. CHEN
An improved criterion for predicting corner stall in axial compressors with varying dihedral angles
H. ZHU, L. ZHOU, J. LI, S. SUN and L. JI
Dynamic performance of a switching and proportional hybrid-controlled xenon feed system for electric propulsion applications
C. CHEN, W. WANG, Z. YAN, Y. CHEN, J. GAO and T. CHEN
Numerical investigation of mixing enhancement mechanism and propagation characteristics of rotating detonation waves in a ramjet-based engine
Y. CHEN, S. LIU, H. PENG, S. LIU, W. FAN and W. LIU
Experimental study of a novel long pulse-width plasma ignition system to expand lean ignition limit of kerosene air mixture
Z. WU, Z. SHANG, Z. ZHANG, H. SONG, M. JIA, Y. CHEN, Y. WU and Y. LI
Sensitivity analysis for stall inception of transonic rotor based on meridional flow
H. NI, Y. FANG, Z. ZHOU, D. XU, D. SUN and X. SUN
A numerical method for combustion instability in solid rocket motor based on unsteady combustion model
G. ZHANG, S. YUE, Z. WANG, W. AO and P. LIU
Low-noise and fast-response variable cold gas micro-thruster developed for Taiji program
C. YANG, J. HE, C. ZHANG, L. DUAN, Q. KANG and S. YANG
Solid Mechanics and Vehicle Conceptual Design
Coupling an advanced actuator surface method with CFD for unsteady aerodynamic simulation of helicopter (Cover article)
T. ZHANG, Y. SHI, G. XU, Y. GONG and Z. HU
Dimensionality reduction method based on energy order distribution for multi-nonlinearity-coupled rotor-bearing system
R. ZHAO, Y. JIAO, Z. ZHAO, Z. CHEN, H. GUO, Z. DENG, Z. LI and R. LIU
A CCF life prediction model based on iso-damage curves considering effect of load sequence
J. FAN, Z. LI, D. SHI, C. LIU and X. YANG
Non-hermiticity of metamaterial panel subjected to supersonic aerodynamic force and its asymmetric vibration transmittance
P. SHI, F. LIU, P. JIANG, Y. XU, Y. GU and Z. YANG
Peak-heat-flux entry test trajectory optimization by disjunctive programming
Z. DENG and L. LIU
Electronics and Electrical Engineering and Control
Multi-stage robust optimization for a of UAV trajectory planning problems with uncertain nonlinear dynamics (Fast Track)
Z. FENG, W. XUE, R. ZHANG and H. LI
Review of progress in microwave electromagnetic stealth metasurfaces (Review)
J. YANG, Y. LI, D. YI, M. LI, Y. HUANG and M.-C. TANG
From fundamentals to applications of incremental nonlinear dynamic inversion: A survey on INDI – Part I (Review)
A. STEINERT, S. RAAB, S. HAFNER, F. HOLZAPFEL and H. HONG
Advancements in incremental nonlinear dynamic inversion and its components: A survey on INDI – Part II (Review)
A. STEINERT, S. RAAB, S. HAFNER, F. HOLZAPFEL and H. HONG
A three-stage series model predictive torque and flux control system based on fast optimal voltage vector selection for more electric aircraft
Z. FU, L. PENG, S. PING, L. GE and W. LI
Continuity and integrity allocation over operational exposure time for ARAIM fault detection algorithm
J. DU, H. WANG, K. FANG, Z. WANG and Y. ZHU
MFR-YOLOv10: Object detection in UAV-taken images based on multilayer feature reconstruction network
M. TIAN, M. CUI, Z. CHEN, Y. MA and S. YU
Behavior-based cooperative control method for fixed-wing UAV swarm through a virtual tube considering safety constraints
S. YUE, D. ZHENG, M. WEI, Z. CHU and D. LIN
Autonomous nighttime navigation with lunar polarized light: A 3-D attitude determination approach
T. CHEN, J. YIN, P. HU, X. ZHANG, X. YU, H.-n. WU and L. GUO
A novel sliding mode control method with enhanced permanent magnet synchronous motor parameter identification for heavy load multi-DOF envelope forming press
X. HAN, X. CHEN, F. ZHENG, L. HUA and W. ZHUANG
Reinforcement learning based optimized backstepping control for hypersonic vehicles with disturbance observer
H. CHENG, X. LIU, X. LIANG, X. ZHANG and S. LI
Nonsingular field-of-view constrained cooperative guidance with improved time-to-go estimation
X. YANG, Y. WU, W. XIA, X. LIU and H. DUAN
A GM-PHD-SLAM algorithm based on pose and map alternating update (微信)
H. SHEN-TU, Z. BAI, Y. CHEN, Y. WEI, J. ZHAO and Z. CAO
Hybrid non-fragile attitude takeover control of modular spacecraft with communication delay
Z. YANG, Y. DING, R. TAO and X. YUE
Material Engineering and Mechanical Manufacturing
Numerical study of mesoscopic ablation-erosion of C/C composites with inclined fibers
J. YANG, J. GE, X. LIU, Z. JING, T. SHANG and J. LIANG
Radiometric propulsion for sun-powered near-space aircraft: Advancing with order-of-magnitude enhancement through graphene aerogel-coated vanes
B. PENG, B. ZHU, D. DMITRIEV and J. ZHANG
CFRTS butt joint forming with Metal-Assistant-Clamping (MAC) laser rotational welding method
C. JING, Y. XIAO, J. LIU, J. WANG and J. JIAO
Achieving ultrahigh microhardness and superior wear resistances in 60NiTi alloys towards bearing applications
Y. WANG, G. ZHANG, Y. WU, Y. ZHENG, H. WANG, Y. LI, X. CAO, X. MENG, Z. GAO and X. YI
Impact of central abrasive grain absence on micro-hole helical grinding
B. CHEN, Q. LI, M. AMIN and S. YUAN
A leakage rate prediction method of wet-assembly hybrid bonded/bolted joints based on porous media theory available for different environment conditions
D. ZHAO, R. BAI, B. LIANG, H. CHENG, Y. SHI, Z. FANG, H. YAO and C. YANG